See it on fabric
AC-DC Applique Embroidery Design
Purchased 111 times by embroiderers
- All 6 sizes included
- 14 machine formats included
Does it fit your hoop and machine?
Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Singer · Tajima and most home machines.
See all 14 file formats
- CSD
- DST
- EMD
- EXP
- HUS
- JEF
- PCM
- PCS
- PEC
- PES
- SEW
- VIP
- VP3
- XXX
Geometric check against standard hoop sizes. It does not certify a specific machine model.
Digital machine-embroidery files only — no physical item will be shipped
Details for Size 1 · 99.4 × 43 mm: 5,664 stitches · 11 colour stops · 2 threads
in stitching order · read from the embroidery file
- Instant download right after payment
- Unlimited re-downloads, forever, from your account
- Secure payment with Stripe & PayPal
Embroidery thread colours & stitching order
Read stop by stop from the embroidery file in your download.
Showing: Size 1 · 99.4 × 43 mmChange
This design uses a technique with its own steps (fabric placement, trimming, foam or water-soluble stabilizer). The download does not include process instructions, so this plan shows the file data only. Follow your designer's or machine's instructions for the technique.
- 1red661%#FF0000
- 2light grey1433%#C7C7C7
- 3red1,15820%#FF0000
- 4light grey1152%#C7C7C7
- 5red91916%#FF0000
- 6light grey882%#C7C7C7
- 7red84515%#FF0000
- 8light grey1473%#C7C7C7
- 9red1,19221%#FF0000
- 10light grey1152%#C7C7C7
- 11red87615%#FF0000
2 spools for 11 stops: some colours come back
- stops 1, 3, 5, 7, 9, 11 · 89%
- stops 2, 4, 6, 8, 10 · 11%
Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.
Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.
Chart for the selected size: 99 × 43 mm
Machine time
Multi-needle machine: about 6–9 min
A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.
Adjust speed and pauses
Multi-needle machine: Effective speed (spm) 700–950 · Pause per colour change (s) 3
Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.
Before you start & guidance for your fabric
- Load the file for this size and check the machine reads the right format.
- Choose a hoop the design fits in with margin; do not scale the design to force it.
- Prepare the threads in the order below; some colours come back later in the sequence.
- Hoop fabric and stabilizer together, flat and without stretching.
- Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.
Guidance for your fabric
The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.
Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.
General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.
Formats & technical data for this size
- CSD
- DST
- EMD
- EXP
- HUS
- JEF
- PCM
- PCS
- PEC
- PES
- SEW
- VIP
- VP3
- XXX
DST header count: 5,744 · Jumps: 69 · Longest stitch: 11 mm From the file
What is verified and what is an estimate
- Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
- Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
- Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Included with Pro — uses 1 of your 50 monthly downloads
Pro pays off from 11 designs at this price
With the Pro plan you download this design plus 49 more every month for €29.99.
That’s up to 80% off if you download a few designs.
See plansAll 6 sizes: measurements, hoop and stitches
99–299 mm · 5,664–17,618 stitches · 4×4 in – 5×7 in – 6×10 in – 8×12 in
| Size | Millimeters | Inches | Hoop | Stitches |
|---|---|---|---|---|
| Size 1 | 99 × 43 mm | 3.91 × 1.69 in | 4×4 in | 5,664 |
| Size 2 | 125 × 54 mm | 4.93 × 2.13 in | 5×7 in | 7,427 |
| Size 3 | 150 × 65 mm | 5.91 × 2.56 in | 5×7 in | 8,609 |
| Size 4 | 200 × 87 mm | 7.88 × 3.42 in | 6×10 in | 11,911 |
| Size 5 | 250 × 109 mm | 9.85 × 4.28 in | 6×10 in | 14,420 |
| Size 6 | 299 × 130 mm | 11.78 × 5.12 in | 8×12 in | 17,618 |
About this design
AC-DC Applique Embroidery Design, particularly good on denim and canvas, where the thread contrasts with the weave.
Sizes and stitch counts
Comes in 6 sizes: 99 × 43 mm (5,664 stitches), 125 × 54 mm (7,427), 150 × 65 mm (8,609), 200 × 87 mm (11,911), 250 × 109 mm (14,420) and 299 × 130 mm (17,618). The smallest fits a 10 × 10 cm hoop.
Formats and machines
14 formats in a single file — PES, DST, JEF, EXP, HUS, VP3 and more: pick the one your machine reads and go.
Before you stitch
Dark canvas needs a topping so the design does not sink into the weave.