See it on fabric
Buzz Toy Story 2 Cartoon Embroidery Design
- 1 size included
- 11 machine formats included
Does it fit your hoop and machine?
Works with Brother · Janome · Husqvarna · Bernina · Singer · Tajima and most home machines.
Formats declared for this product (11)
Formats declared for the product, not checked size by size.
- ART
- CND
- DST
- EXP
- HUS
- JEF
- KSM
- PEC
- PES
- SEW
- XXX
Geometric check against standard hoop sizes. It does not certify a specific machine model.
Digital machine-embroidery files only — no physical item will be shipped
17,695 stitches · 17 colour stops · 13 threads
+1in stitching order · read from the embroidery file
- Instant download right after payment
- Unlimited re-downloads, forever, from your account
- Secure payment with Stripe & PayPal
Embroidery thread colours & stitching order
Read stop by stop from the embroidery file in your download.
- 1black2061%#000000
- 2white3,48420%#FFFFFF
- 3red5383%#FF0000
- 4cream5383%#FDE2C5
- 5violet1,3278%#7565A7
- 6mint1451%#65FCBF
- 7lime green4,24324%#93C748
- 8grey1,3718%#9AA5A0
- 9violet1,1066%#7565A7
- 10lemon1591%#E9EE2D
- 11red750%#FF0000
- 12emerald660%#0E9249
- 13white830%#FFFFFF
- 14blue1961%#2784BD
- 15black3,25218%#000000
- 16coffee1161%#3C3917
- 17lilac7884%#BCC2FE
13 spools for 17 stops: some colours come back
- stops 1, 15 · 20%
- stops 2, 13 · 20%
- stops 3, 11 · 3%
- stops 4 · 3%
- stops 5, 9 · 14%
- stops 6 · 1%
- stops 7 · 24%
- stops 8 · 8%
- stops 10 · 1%
- stops 12 · 0%
- stops 14 · 1%
- stops 16 · 1%
- stops 17 · 4%
Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.
Machine time
Multi-needle machine: about 19–26 min
A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.
Adjust speed and pauses
Multi-needle machine: Effective speed (spm) 700–950 · Pause per colour change (s) 3
Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.
Before you start & guidance for your fabric
- Load the file for this size and check the machine reads the right format.
- Choose a hoop the design fits in with margin; do not scale the design to force it.
- Prepare the threads in the order below; some colours come back later in the sequence.
- Hoop fabric and stabilizer together, flat and without stretching.
- Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.
Guidance for your fabric
The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.
Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.
General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.
Formats & technical data for this size
- ART
- CND
- DST
- EXP
- HUS
- JEF
- KSM
- PEC
- PES
- SEW
- XXX
Formats declared for the product, not checked size by size.
Longest stitch: 8.9 mm · Bobbin thread: 26.5 m · Thread trims: 61 From the file
What is verified and what is an estimate
- Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
- Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
- Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Included with Pro — uses 1 of your 50 monthly downloads
Pro pays off from 7 designs at this price
With the Pro plan you download this design plus 49 more every month for €29.99.
That’s up to 80% off if you download a few designs.
See plans
About this design
A 10-colour take on Buzz Toy Story 2 Cartoon, worked in 17,695 stitches over 17 stops. The threads are black, white, red, pale orange, blue, green, light grey, yellow, deep yellow and pale blue. At 100 × 72 mm it fits a 5×7 in hoop, which makes it a natural choice for a shirt back, a tote or the front of a hoodie.
You get the full stop sequence before you buy: which colour goes down first, how many stitches each pass takes and where the 16 thread changes fall. The heaviest pass is the green at 4,243 stitches, 24% of the design, so that is the one to plan your stabiliser around.
Every machine format is in the download, and the full colour chart is right on this page, stop by stop, to keep beside the machine.