EmbroideryDownload
Dragons, Dinosaurs & Unicorns

Dragon Eye Embroidery Design

€3.99 $4.35charged in euros
  • All 8 sizes included
  • 8 machine formats included

Does it fit your hoop and machine?

All 8 sizes are in your download.
89.6 × 96.2 mmFrom the fileFits a 4×4 in hoop (100 × 100 mm)Tight fit (3.8 mm to spare): check the real usable area of your hoop and machine.

Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Singer · Tajima and most home machines.

See all 8 file formats
  • DST
  • EXP
  • HUS
  • JEF
  • PES
  • VIP
  • VP3
  • XXX

Geometric check against standard hoop sizes. It does not certify a specific machine model.

File won't stitch due to a defect? We'll convert it to your format or refund you

Digital machine-embroidery files only — no physical item will be shipped

Details for Size 1 · 89.6 × 96.2 mm: 25,887 stitches · 10 colour stops · 10 threads

in stitching order · read from the embroidery file

  • Instant download right after payment
  • Unlimited re-downloads, forever, from your account
  • Secure payment with Stripe & PayPal

Embroidery thread colours & stitching order

Read stop by stop from the embroidery file in your download.

Showing: Size 1 · 89.6 × 96.2 mmChange

89.6 × 96.2 mm · 3.53 × 3.79 in · 4×4 in · Ideal: towels · totes · shirts10 colours · 10 stops · 25,887 stitches
  1. 1burgundy6,29024%#801206
  2. 2soft black8,78534%#350404
  3. 3soft black2,3089%#212121
  4. 4slate2521%#666666
  5. 5bright red9013%#FF5112
  6. 6burgundy1,4406%#7D3014
  7. 7peach1,0864%#FF9933
  8. 8lemon1,0644%#FFF129
  9. 9white7073%#FFFFFF
  10. 10black3,05412%#020101

Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.

Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.

Chart for the selected size: 90 × 96 mm

Machine time

about 41–54 minSingle-needle home machine Estimate

Multi-needle machine: about 28–37 min

A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.

Adjust speed and pauses

Multi-needle machine: Effective speed (spm) 700950 · Pause per colour change (s) 3

Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.

Before you start & guidance for your fabric
  1. Load the file for this size and check the machine reads the right format.
  2. Choose a hoop the design fits in with margin; do not scale the design to force it.
  3. Prepare the threads in the order below; some colours come back later in the sequence.
  4. Hoop fabric and stabilizer together, flat and without stretching.
  5. Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.

Guidance for your fabric

The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.

Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.

General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.

Formats & technical data for this size

  • DST
  • EXP
  • HUS
  • JEF
  • PES
  • VIP
  • VP3
  • XXX

DST header count: 26,037 · Jumps: 140 · Longest stitch: 16.3 mm From the file

What is verified and what is an estimate
  • Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
  • Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
  • Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Save with subscription

Included with Pro — uses 1 of your 50 monthly downloads

Pro pays off from 8 designs at this price

With the Pro plan you download this design plus 49 more every month for €29.99.

That’s up to 80% off if you download a few designs.

See plans

All 8 sizes: measurements, hoop and stitches

96–274 mm · 25,887–102,700 stitches · 4×4 in – 5×7 in – 6×10 in – 8×12 in – 9.5×14 in – Larger than a home hoop
SizeMillimetersInchesHoopStitches
Size 190 × 96 mm3.53 × 3.79 in4×4 in25,887
Size 2116 × 123 mm4.55 × 4.84 in5×7 in34,786
Size 3140 × 148 mm5.51 × 5.83 in6×10 in43,616
Size 4163 × 174 mm6.4 × 6.83 in8×12 in53,456
Size 5187 × 199 mm7.34 × 7.83 in8×12 in64,408
Size 6210 × 223 mm8.26 × 8.79 in9.5×14 in76,317
Size 7234 × 249 mm9.22 × 9.82 in9.5×14 in88,678
Size 8257 × 274 mm10.13 × 10.78 inLarger than a home hoop102,700

About this design

Dragon Eye Embroidery Design with fur and shading built up in layers, so it reads as volume without overloading the stitch count.

Sizes and stitch counts

Comes in 8 sizes: 90 × 96 mm (25,887 stitches), 116 × 123 mm (34,786), 140 × 148 mm (43,616), 162 × 174 mm (53,456), 186 × 199 mm (64,408), 210 × 223 mm (76,317), 234 × 249 mm (88,678) and 257 × 274 mm (102,700). The smallest fits a 10 × 10 cm hoop.

Formats and machines

The download includes 8 formats, among them PES, DST, JEF, EXP, HUS, VP3, so it runs on Brother, Janome, Husqvarna, Bernina and Pfaff with no conversion.

Before you stitch

A sharp needle (75/11) keeps the fine fur detail from tearing the fabric.