Eight Flags Embroidery Design
Purchased 10 times by embroiderers
- Complete pack included · all 8 design and size variants · 8 file formats across the pack
Does it fit your hoop and machine?
Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Singer · Tajima and most home machines.
See the 8 file formats for Dominican
- DST
- EXP
- HUS
- JEF
- PES
- SEW
- VP3
- XXX
Geometric check against standard hoop sizes. It does not certify a specific machine model.
Digital machine-embroidery files only — no physical item will be shipped
Details for Dominican · 44 × 28.4 mm: 3,764 stitches · 6 colour stops · 5 threads
in stitching order · read from the embroidery file
- Instant download right after payment
- Unlimited re-downloads, forever, from your account
- Secure payment with Stripe & PayPal
Embroidery thread colours & stitching order
Read stop by stop from the embroidery file in your download.
Showing: Dominican · 44 × 28.4 mmChange
- 1off white94825%#ECEDFF
- 2emerald541%#008745
- 3cherry98226%#BE1422
- 4indigo93825%#2C356B
- 5off white82922%#ECEDFF
- 6yellow130%#EFC82C
5 spools for 6 stops: some colours come back
- stops 1, 5 · 47%
- stops 2 · 1%
- stops 3 · 26%
- stops 4 · 25%
- stops 6 · 0%
Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.
Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.
Chart for the selected size: Dominican
Machine time
Multi-needle machine: about 4–6 min
A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.
Adjust speed and pauses
Multi-needle machine: Effective speed (spm) 700–950 · Pause per colour change (s) 3
Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.
Before you start & guidance for your fabric
- Load the file for this size and check the machine reads the right format.
- Choose a hoop the design fits in with margin; do not scale the design to force it.
- Prepare the threads in the order below; some colours come back later in the sequence.
- Hoop fabric and stabilizer together, flat and without stretching.
- Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.
Guidance for your fabric
The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.
Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.
General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.
Formats & technical data for this size
- DST
- EXP
- HUS
- JEF
- PES
- SEW
- VP3
- XXX
- Format availability varies by variant.
DST header count: 3,782 · Jumps: 12 · Longest stitch: 12.8 mm From the file
What is verified and what is an estimate
- Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
- Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
- Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Included with Pro — uses 1 of your 50 monthly downloads
With the Pro plan you download this design plus 49 more every month for €29.99.
That’s up to 80% off if you download a few designs.
See plansIncluded designs and sizes
44–44 mm · 2,966–4,570 stitches · 4×4 in
Each row identifies a design or character and its size. All listed options are included.
| Design / size | Millimeters | Inches | Hoop | Stitches |
|---|---|---|---|---|
| Dominican | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 3,764 |
| Ghana | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 3,642 |
| Guyana | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 4,540 |
| Maxico | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 3,568 |
| Nigeria | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 2,966 |
| Puerto Rico | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 4,570 |
| Suriname | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 3,718 |
| United States | 44 × 28 mm | 1.73 × 1.12 in | 4×4 in | 4,564 |
About this design
Eight Flags Embroidery Design for caps, backpacks, jackets and patches. The colours sit in tidy blocks and the stitch order keeps the areas from overlapping.
Sizes and stitch counts
Check the specifications on this page for dimensions and stitch counts. Select a design or size, where available, to view its thread colours and stitching order.
Formats and machines
8 formats in a single file — PES, DST, JEF, EXP, HUS, VP3 and more: pick the one your machine reads and go.
Before you stitch
Follow the colour order as supplied. Flags are built so each block anchors the next, and reordering leaves gaps at the seams.
This design is free: the full download, no watermark, every format included.