Goofy Disney Embroidery Design
Purchased 70 times by embroiderers
- All 2 sizes included
- 18 machine formats included
Does it fit your hoop and machine?
Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Singer · Tajima and most home machines.
See all 18 file formats
- CND
- CSD
- DAT
- DSB
- DST
- DSZ
- EXP
- HUS
- JEF
- MJD
- MON
- PCM
- PCS
- PES
- TAP
- VIP
- VP3
- XXX
Geometric check against standard hoop sizes. It does not certify a specific machine model.
Digital machine-embroidery files only — no physical item will be shipped
Details for Size 1 · 81 × 102 mm: 14,181 stitches · 20 colour stops · 11 threads
+4in stitching order · read from the embroidery file
- Instant download right after payment
- Unlimited re-downloads, forever, from your account
- Secure payment with Stripe & PayPal
Embroidery thread colours & stitching order
Read stop by stop from the embroidery file in your download.
Showing: Size 1 · 81 × 102 mmChange
- 1terracotta1,1008%#974B00
- 2sienna3553%#927038
- 3soft black1,1498%#060606
- 4cobalt1,78113%#005592
- 5soft black1,42010%#060606
- 6mustard1,79513%#E7982D
- 7soft black1,43510%#060606
- 8red3032%#D42727
- 9soft black2902%#060606
- 10white2031%#FFFFFF
- 11soft black1,1008%#060606
- 12salmon1081%#F7887D
- 13crimson721%#9F233F
- 14rose620%#D66399
- 15soft black450%#060606
- 16sand4393%#F5D6A1
- 17white781%#FFFFFF
- 18soft black5574%#060606
- 19white8646%#FFFFFF
- 20soft black1,0257%#060606
11 spools for 20 stops: some colours come back
- stops 1 · 8%
- stops 2 · 3%
- stops 3, 5, 7, 9, 11, 15, 18, 20 · 50%
- stops 4 · 13%
- stops 6 · 13%
- stops 8 · 2%
- stops 10, 17, 19 · 8%
- stops 12 · 1%
- stops 13 · 1%
- stops 14 · 0%
- stops 16 · 3%
Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.
Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.
Chart for the selected size: 81 × 102 mm
Machine time
Multi-needle machine: about 16–21 min
A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.
Adjust speed and pauses
Multi-needle machine: Effective speed (spm) 700–950 · Pause per colour change (s) 3
Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.
Before you start & guidance for your fabric
- Load the file for this size and check the machine reads the right format.
- Choose a hoop the design fits in with margin; do not scale the design to force it.
- Prepare the threads in the order below; some colours come back later in the sequence.
- Hoop fabric and stabilizer together, flat and without stretching.
- Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.
Guidance for your fabric
The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.
Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.
General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.
Formats & technical data for this size
- CND
- CSD
- DAT
- DSB
- DST
- DSZ
- EXP
- HUS
- JEF
- MJD
- MON
- PCM
- PCS
- PES
- TAP
- VIP
- VP3
- XXX
DST header count: 14,301 · Jumps: 100 · Longest stitch: 9.6 mm · Thread trims: 39 From the file
What is verified and what is an estimate
- Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
- Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
- Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Included with Pro — uses 1 of your 50 monthly downloads
Pro pays off from 9 designs at this price
With the Pro plan you download this design plus 49 more every month for €29.99.
That’s up to 80% off if you download a few designs.
See plansAll 2 sizes: measurements, hoop and stitches
102–178 mm · 14,181–31,180 stitches · 5×7 in – 6×10 in
| Size | Millimeters | Inches | Hoop | Stitches |
|---|---|---|---|---|
| Size 1 | 81 × 102 mm | 3.17 × 4.03 in | 5×7 in | 14,181 |
| Size 2 | 140 × 178 mm | 5.53 × 7 in | 6×10 in | 31,180 |
About this design
Goofy Disney Embroidery Design for shirts, bibs, backpacks and children's blankets. The facial details are carefully digitised — that is where a well-made design shows.
Sizes and stitch counts
Comes in 2 sizes: 80 × 102 mm (14,181 stitches) and 140 × 178 mm (31,180). The smallest fits a 13 × 18 cm hoop.
Formats and machines
The download includes 18 formats, among them PES, DST, JEF, EXP, HUS, VP3, so it runs on Brother, Janome, Husqvarna, Bernina and Pfaff with no conversion.
Before you stitch
Slow to around 600 stitches per minute on the facial details: that is where thread breaks show most.