EmbroideryDownload
Christmas

Santa Claus in a Glass of Champagne Embroidery Design

€6.99 $7.62charged in euros
  • All 7 sizes included
  • 9 machine formats included

Does it fit your hoop and machine?

All 7 sizes are in your download.
50 × 102 mmFrom the fileFits a 5×7 in hoop (130 × 180 mm)1.9 mm over the 4×4 in limit, so the next hoop up is needed.

Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Singer · Tajima and most home machines.

See all 9 file formats
  • DST
  • EXP
  • HUS
  • JEF
  • PEC
  • PES
  • VIP
  • VP3
  • XXX

Geometric check against standard hoop sizes. It does not certify a specific machine model.

File won't stitch due to a defect? We'll convert it to your format or refund you

Digital machine-embroidery files only — no physical item will be shipped

Details for Size 1 · 50 × 102 mm: 5,631 stitches · 6 colour stops · 5 threads

in stitching order · read from the embroidery file

  • Instant download right after payment
  • Unlimited re-downloads, forever, from your account
  • Secure payment with Stripe & PayPal

Embroidery thread colours & stitching order

Read stop by stop from the embroidery file in your download.

Showing: Size 1 · 50 × 102 mmChange

50 × 102 mm · 1.97 × 4.01 in · 5×7 in · Ideal: towels · totes · shirts5 colours · 6 stops · 5,631 stitches
  1. 1pale pink1372%#FFC4EC
  2. 2white1,07119%#FFFFFF
  3. 3dark red1,85733%#990000
  4. 4black1,51227%#000000
  5. 5slate1,03618%#575757
  6. 6black180%#000000

5 spools for 6 stops: some colours come back

  • stops 1 · 2%
  • stops 2 · 19%
  • stops 3 · 33%
  • stops 4, 6 · 27%
  • stops 5 · 18%

Stitch counts are per stop, read from an embroidery file. Colours are an approximate visual guide based on the available files or previews. Choose the thread colours you prefer.

Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.

Chart for the selected size: 50 × 102 mm

Machine time

about 11–14 minSingle-needle home machine Estimate

Multi-needle machine: about 6–8 min

A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.

Adjust speed and pauses

Multi-needle machine: Effective speed (spm) 700950 · Pause per colour change (s) 3

Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.

Before you start & guidance for your fabric
  1. Load the file for this size and check the machine reads the right format.
  2. Choose a hoop the design fits in with margin; do not scale the design to force it.
  3. Prepare the threads in the order below; some colours come back later in the sequence.
  4. Hoop fabric and stabilizer together, flat and without stretching.
  5. Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.

Guidance for your fabric

The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.

Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.

General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.

Formats & technical data for this size

  • DST
  • EXP
  • HUS
  • JEF
  • PEC
  • PES
  • VIP
  • VP3
  • XXX

DST header count: 5,689 · Jumps: 52 · Longest stitch: 14 mm From the file

What is verified and what is an estimate
  • Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
  • Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
  • Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Save with subscription

Included with Pro — uses 1 of your 50 monthly downloads

Pro pays off from 5 designs at this price

With the Pro plan you download this design plus 49 more every month for €29.99.

That’s up to 80% off if you download a few designs.

See plans

All 7 sizes: measurements, hoop and stitches

102–254 mm · 5,631–18,365 stitches · 5×7 in – 6×10 in
SizeMillimetersInchesHoopStitches
Size 150 × 102 mm1.97 × 4.01 in5×7 in5,631
Size 263 × 127 mm2.46 × 5.01 in5×7 in7,310
Size 375 × 153 mm2.95 × 6.01 in5×7 in9,296
Size 486 × 176 mm3.39 × 6.91 in5×7 in11,054
Size 5100 × 204 mm3.93 × 8.01 in6×10 in13,421
Size 6112 × 229 mm4.42 × 9.01 in6×10 in15,834
Size 7125 × 254 mm4.92 × 10.01 in6×10 in18,365

About this design

Santa Claus in a Glass of Champagne Embroidery Design, a seasonal motif for table textiles, gift bags and home linen.

Sizes and stitch counts

Comes in 7 sizes: 50 × 102 mm (5,631 stitches), 62 × 127 mm (7,310), 75 × 153 mm (9,296), 86 × 176 mm (11,054), 100 × 204 mm (13,421), 112 × 229 mm (15,834) and 125 × 254 mm (18,365). The smallest fits a 13 × 18 cm hoop.

Formats and machines

9 formats in a single file — PES, DST, JEF, EXP, HUS, VP3 and more: pick the one your machine reads and go.

Before you stitch

Metallic thread wants a bigger needle (90/14) and half the usual speed.