Teddy Bear Embroidery Design
Purchased 71 times by embroiderers
- All 2 sizes included
- 8 machine formats included
Does it fit your hoop and machine?
Works with Brother · Janome · Husqvarna · Pfaff · Bernina · Tajima and most home machines.
See all 8 file formats
- DST
- EXP
- HUS
- JEF
- PCS
- PES
- VIP
- VP3
Geometric check against standard hoop sizes. It does not certify a specific machine model.
Digital machine-embroidery files only — no physical item will be shipped
Details for Size 1 · 84.4 × 99.5 mm: 7,972 stitches · 13 colour stops · 13 threads
in stitching order · read from the embroidery file
- Instant download right after payment
- Unlimited re-downloads, forever, from your account
- Secure payment with Stripe & PayPal
Embroidery thread colours & stitching order
Read stop by stop from the embroidery file in your download.
Showing: Size 1 · 84.4 × 99.5 mmChange
- 1apple green3234%#70BC1F
- 2cherry1612%#C70156
- 3blue2573%#4B6BAF
- 4pale pink941%#FCBBC5
- 5navy911%#0E1F7C
- 6bright red581%#FE370F
- 7dark green1061%#003822
- 8cherry3,35242%#B54B64
- 9light grey5267%#D8CCC6
- 10black90511%#000000
- 11ecru621%#FDD9DE
- 12salmon491%#F993BC
- 13old gold1,98825%#D0A660
Colours taken from the machine palette stored in the PES/JEF file: each thread is the nearest colour of that chart, not the exact design colour.
Opens your browser’s print dialog. Choose “Save as PDF” there to keep a copy.
Chart for the selected size: 84 × 100 mm
Machine time
Multi-needle machine: about 9–12 min
A range, not a promise: stitches ÷ effective speed, plus one pause per colour change. Adjust it to your machine.
Adjust speed and pauses
Multi-needle machine: Effective speed (spm) 700–950 · Pause per colour change (s) 3
Hooping, stabilizer and threading are not included (typically 5–15 min). Nominal speeds from manufacturer specifications (e.g. Janome MC500E 400–860 spm). Effective speed is lower.
Before you start & guidance for your fabric
- Load the file for this size and check the machine reads the right format.
- Choose a hoop the design fits in with margin; do not scale the design to force it.
- Prepare the threads in the order below; some colours come back later in the sequence.
- Hoop fabric and stabilizer together, flat and without stretching.
- Use a fresh embroidery needle; stitch a test on a scrap of the same fabric if in doubt.
Guidance for your fabric
The heavier the fabric and the denser the design, the heavier the stabilizer. Cut-away is the safer choice for knits and high stitch counts; tear-away suits stable wovens.
Needle: an embroidery needle (75/11 or 90/14) with rayon or polyester embroidery thread; a metallic needle for metallic threads. Size depends on thread and fabric, not on the stitch count.
General guidance from stabilizer and needle manufacturers' guides (OESD, Sulky, Madeira, SCHMETZ). It does not replace a test on your own fabric. No tension values are given: they depend on your machine.
Formats & technical data for this size
- DST
- EXP
- HUS
- JEF
- PCS
- PES
- VIP
- VP3
DST header count: 8,049 · Jumps: 64 · Longest stitch: 12 mm From the file
What is verified and what is an estimate
- Size, stitch count, stitching order and stitches per block are read from the embroidery file you download.
- Colours are read from the file when it carries them; otherwise they come from a machine palette and are marked as such.
- Machine time, hoop and fabric guidance are estimates or general rules with their assumptions shown.
Included with Pro — uses 1 of your 50 monthly downloads
With the Pro plan you download this design plus 49 more every month for €29.99.
That’s up to 80% off if you download a few designs.
See plansAll 2 sizes: measurements, hoop and stitches
100–150 mm · 7,972–13,196 stitches · 4×4 in – 5×7 in
| Size | Millimeters | Inches | Hoop | Stitches |
|---|---|---|---|---|
| Size 1 | 84 × 100 mm | 3.32 × 3.92 in | 4×4 in | 7,972 |
| Size 2 | 127 × 150 mm | 5 × 5.89 in | 5×7 in | 13,196 |
About this design
Teddy Bear Embroidery Design for shirts, bibs, backpacks and children's blankets. The facial details are carefully digitised — that is where a well-made design shows.
Sizes and stitch counts
Comes in 2 sizes: 84 × 100 mm (8,049 stitches) and 127 × 150 mm (13,305). The smallest fits a 10 × 10 cm hoop.
Formats and machines
The download includes 8 formats, among them PES, DST, JEF, EXP, HUS, VP3, so it runs on Brother, Janome, Husqvarna, Bernina and Pfaff with no conversion.
Before you stitch
Dense character designs need a cut-away backing. Tear-away lets the face distort after the first wash.
This design is free: the full download, no watermark, every format included.
Customer reviews
- Verified purchase
Cliente verificado